Inheritance diagram for ModelTpl< _Scalar, _Options, JointCollectionTpl >:

Public Types
enum	{ Options = _Options }

typedef std::map< std::string, ConfigVectorType >	ConfigVectorMap

typedef VectorXs	ConfigVectorType
	Dense vectorized version of a joint configuration vector.

typedef DataTpl< Scalar, Options, JointCollectionTpl >	Data

typedef ForceTpl< Scalar, Options >	Force

typedef FrameTpl< Scalar, Options >	Frame

typedef pinocchio::FrameIndex	FrameIndex

typedef container::aligned_vector< Frame >	FrameVector

typedef pinocchio::GeomIndex	GeomIndex

typedef pinocchio::Index	Index

typedef std::vector< Index >	IndexVector

typedef InertiaTpl< Scalar, Options >	Inertia

typedef JointCollectionTpl< Scalar, Options >	JointCollection

typedef JointDataTpl< Scalar, Options, JointCollectionTpl >	JointData

typedef container::aligned_vector< JointData >	JointDataVector

typedef pinocchio::JointIndex	JointIndex

typedef JointModelTpl< Scalar, Options, JointCollectionTpl >	JointModel

typedef container::aligned_vector< JointModel >	JointModelVector

typedef MotionTpl< Scalar, Options >	Motion

typedef _Scalar	Scalar

typedef SE3Tpl< Scalar, Options >	SE3

typedef VectorXs	TangentVectorType
	Dense vectorized version of a joint tangent vector (e.g. velocity, acceleration, etc). It also handles the notion of co-tangent vector (e.g. torque, etc).

typedef Eigen::Matrix< Scalar, 3, 1, Options >	Vector3

typedef Eigen::Matrix< Scalar, Eigen::Dynamic, 1, Options >	VectorXs

Public Member Functions
	ModelTpl ()
	Default constructor. Builds an empty model with no joints.

int	addBodyFrame (const std::string &body_name, const JointIndex &parentJoint, const SE3 &body_placement=SE3::Identity(), int previousFrame=-1)
	Add a body to the frame tree. More...

int	addFrame (const Frame &frame)
	Adds a frame to the kinematic tree. More...

JointIndex	addJoint (const JointIndex parent, const JointModel &joint_model, const SE3 &joint_placement, const std::string &joint_name, const VectorXs &max_effort, const VectorXs &max_velocity, const VectorXs &min_config, const VectorXs &max_config)
	Add a joint to the kinematic tree with given bounds. More...

JointIndex	addJoint (const JointIndex parent, const JointModel &joint_model, const SE3 &joint_placement, const std::string &joint_name)
	Add a joint to the kinematic tree with infinite bounds. More...

int	addJointFrame (const JointIndex &joint_index, int previous_frame_index=-1)
	Add a joint to the frame tree. More...

void	appendBodyToJoint (const JointIndex joint_index, const Inertia &Y, const SE3 &body_placement=SE3::Identity())
	Append a body to a given joint of the kinematic tree. More...

template<typename NewScalar >
ModelTpl< NewScalar, Options, JointCollectionTpl >	cast () const

template<typename D >
bool	check (const AlgorithmCheckerBase< D > &checker=AlgorithmCheckerBase< D >()) const
	Check the validity of the attributes of Model with respect to the specification of some algorithms. More...

bool	check () const
	Run check(fusion::list) with DEFAULT_CHECKERS as argument.

bool	check (const Data &data) const
	Run checkData on data and current model. More...

bool	existBodyName (const std::string &name) const
	Check if a body given by its name exists. More...

bool	existFrame (const std::string &name, const FrameType &type=(FrameType)(JOINT\|FIXED_JOINT\|BODY\|OP_FRAME\|SENSOR)) const
	Checks if a frame given by its name exists. More...

bool	existJointName (const std::string &name) const
	Check if a joint given by its name exists. More...

JointIndex	getBodyId (const std::string &name) const
	Return the index of a body given by its name. More...

FrameIndex	getFrameId (const std::string &name, const FrameType &type=(FrameType)(JOINT\|FIXED_JOINT\|BODY\|OP_FRAME\|SENSOR)) const
	Returns the index of a frame given by its name. More...

JointIndex	getJointId (const std::string &name) const
	Return the index of a joint given by its name. More...

bool	operator!= (const ModelTpl &other) const

bool	operator== (const ModelTpl &other) const
	Equality comparison operator. More...

Public Member Functions inherited from Serializable< ModelTpl< _Scalar, _Options, JointCollectionTpl > >
void	loadFromBinary (const std::string &filename)
	Loads a Derived object from an binary file.

void	loadFromString (const std::string &str)
	Loads a Derived object from a string.

void	loadFromStringStream (std::istringstream &is)
	Loads a Derived object from a stream string.

void	loadFromText (const std::string &filename)
	Loads a Derived object from a text file.

void	loadFromXML (const std::string &filename, const std::string &tag_name)
	Loads a Derived object from an XML file.

void	saveToBinary (const std::string &filename) const
	Saves a Derived object as an binary file.

std::string	saveToString () const
	Saves a Derived object to a string.

void	saveToStringStream (std::stringstream &ss) const
	Saves a Derived object to a string stream.

void	saveToText (const std::string &filename) const
	Saves a Derived object as a text file.

void	saveToXML (const std::string &filename, const std::string &tag_name) const
	Saves a Derived object as an XML file.

Public Attributes
TangentVectorType	effortLimit
	Vector of maximal joint torques.

FrameVector	frames
	Vector of operational frames registered on the model.

Motion	gravity
	Spatial gravity of the model.

std::vector< int >	idx_qs
	Starting index of the joint i in the configuration space.

std::vector< int >	idx_vs
	Starting index of the joint i in the tangent configuration space.

container::aligned_vector< Inertia >	inertias
	Spatial inertias of the body i expressed in the supporting joint frame i.

container::aligned_vector< SE3 >	jointPlacements
	Placement (SE3) of the input of joint i regarding to the parent joint output li.

JointModelVector	joints
	Model of joint i, encapsulated in a JointModelAccessor.

VectorXs	lowerPositionLimit
	Lower joint configuration limit.

std::string	name
	Model name;.

std::vector< std::string >	names
	Name of joint i

int	nbodies
	Number of bodies.

int	nframes
	Number of operational frames.

int	njoints
	Number of joints.

int	nq
	Dimension of the configuration vector representation.

std::vector< int >	nqs
	Dimension of the joint i configuration subspace.

int	nv
	Dimension of the velocity vector space.

std::vector< int >	nvs
	Dimension of the joint i tangent subspace.

std::vector< JointIndex >	parents
	Joint parent of joint i, denoted li (li==parents[i]).

ConfigVectorMap	referenceConfigurations
	Map of reference configurations, indexed by user given names.

VectorXs	rotorGearRatio
	Vector of rotor gear ratio parameters.

VectorXs	rotorInertia
	Vector of rotor inertia parameters.

std::vector< IndexVector >	subtrees
	Vector of subtrees. subtree[j] corresponds to the subtree supported by the joint j. The first element of subtree[j] is the index of the joint j itself.

std::vector< IndexVector >	supports
	Vector of supports. supports[j] corresponds to the collection of all joints located on the path between body j and the world. The last element of supports[j] is the index of the joint j itself.

VectorXs	upperPositionLimit
	Upper joint configuration limit.

TangentVectorType	velocityLimit
	Vector of maximal joint velocities.

Static Public Attributes
static const Vector3	gravity981
	Default 3D gravity vector (=(0,0,-9.81)).

Protected Member Functions
void	addJointIndexToParentSubtrees (const JointIndex joint_id)
	Add the joint_id to its parent subtrees. More...

Detailed Description

template<typename _Scalar, int _Options, template< typename, int > class JointCollectionTpl>
struct pinocchio::ModelTpl< _Scalar, _Options, JointCollectionTpl >

Definition at line 18 of file multibody/fwd.hpp.

Member Function Documentation

int addBodyFrame	(	const std::string &	body_name,
		const JointIndex &	parentJoint,
		const SE3 &	body_placement = `SE3::Identity()`,
		int	previousFrame = `-1`
	)

Add a body to the frame tree.

Parameters

[in]	body_name	Name of the body.
[in]	parentJoint	Index of the parent joint.
[in]	body_placement	The relative placement of the body regarding to the parent joint. Set default to the Identity placement.
[in]	previousFrame	Index of the parent frame. If negative, the parent frame is the frame of the parent joint.

Returns: The index of the new frame or -1 in case of error.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

int addFrame ( const Frame & frame )

Adds a frame to the kinematic tree.

Parameters

[in] frame The frame to add to the kinematic tree.

Returns: Returns the index of the frame if it has been successfully added, -1 otherwise.

Referenced by ModelTpl< ADScalar, Options >::ModelTpl(), and ModelTpl< ADScalar, Options >::operator!=().

JointIndex addJoint	(	const JointIndex	parent,
		const JointModel &	joint_model,
		const SE3 &	joint_placement,
		const std::string &	joint_name,
		const VectorXs &	max_effort,
		const VectorXs &	max_velocity,
		const VectorXs &	min_config,
		const VectorXs &	max_config
	)

Add a joint to the kinematic tree with given bounds.

Remarks: This method does not add a Frame of same name to the vector of frames. Use Model::addJointFrame.; The inertia supported by the joint is set to Zero.

Template Parameters

JointModelDerived The type of the joint model.

Parameters

[in]	parent	Index of the parent joint.
[in]	joint_model	The joint model.
[in]	joint_placement	Placement of the joint inside its parent joint.
[in]	joint_name	Name of the joint. If empty, the name is random.
[in]	max_effort	Maximal joint torque.
[in]	max_velocity	Maximal joint velocity.
[in]	min_config	Lower joint configuration.
[in]	max_config	Upper joint configuration.

Returns: The index of the new joint.

See also: Model::appendBodyToJoint, Model::addJointFrame

Referenced by ModelTpl< ADScalar, Options >::operator!=().

JointIndex addJoint	(	const JointIndex	parent,
		const JointModel &	joint_model,
		const SE3 &	joint_placement,
		const std::string &	joint_name
	)

Add a joint to the kinematic tree with infinite bounds.

Remarks: This method also adds a Frame of same name to the vector of frames.; The inertia supported by the joint is set to Zero.

Template Parameters

JointModelDerived The type of the joint model.

Parameters

[in]	parent	Index of the parent joint.
[in]	joint_model	The joint model.
[in]	joint_placement	Placement of the joint inside its parent joint.
[in]	joint_name	Name of the joint. If empty, the name is random.

Returns: The index of the new joint.

See also: Model::appendBodyToJoint

int addJointFrame	(	const JointIndex &	joint_index,
		int	previous_frame_index = `-1`
	)

Add a joint to the frame tree.

Parameters

[in]	jointIndex	Index of the joint.
[in]	frameIndex	Index of the parent frame. If negative, the parent frame is the frame of the parent joint.

Returns: The index of the new frame or -1 in case of error.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

void addJointIndexToParentSubtrees ( const JointIndex joint_id )

protected

Add the joint_id to its parent subtrees.

Parameters

[in] joint_id The id of the joint to add to the subtrees

Referenced by ModelTpl< ADScalar, Options >::check().

void appendBodyToJoint	(	const JointIndex	joint_index,
		const Inertia &	Y,
		const SE3 &	body_placement = `SE3::Identity()`
	)

Append a body to a given joint of the kinematic tree.

Parameters

[in]	joint_index	Index of the supporting joint.
[in]	Y	Spatial inertia of the body.
[in]	body_placement	The relative placement of the body regarding to the parent joint. Set default to the Identity placement.

See also: Model::addJoint

Referenced by ModelTpl< ADScalar, Options >::operator!=().

ModelTpl<NewScalar,Options,JointCollectionTpl> cast ( ) const

inline

Returns: An expression of *this with the Scalar type casted to NewScalar.

copy into vectors

Definition at line 188 of file multibody/model.hpp.

bool check ( const AlgorithmCheckerBase< D > & checker = AlgorithmCheckerBase<D>() ) const

inline

Check the validity of the attributes of Model with respect to the specification of some algorithms.

The method is a template so that the checkers can be defined in each algorithms.

Parameters

[in] checker a class, typically defined in the algorithm module, that validates the attributes of model.

Returns: true if the Model is valid, false otherwise.

Definition at line 517 of file multibody/model.hpp.

Referenced by pinocchio::kineticEnergy(), and pinocchio::potentialEnergy().

bool check ( const Data & data ) const

inline

Run checkData on data and current model.

Parameters

[in] data to be checked wrt *this.

Returns: true if the data is valid, false otherwise.

bool existBodyName ( const std::string & name ) const

Check if a body given by its name exists.

Parameters

[in] name Name of the body.

Returns: True if the body exists in the kinematic tree.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

bool existFrame	(	const std::string &	name,
		const FrameType &	type = `(FrameType)(JOINT\|FIXED_JOINT\|BODY\|OP_FRAME\|SENSOR)`
	)		const

Checks if a frame given by its name exists.

Parameters

[in]	name	Name of the frame.
[in]	type	Type of the frame.

Returns: Returns true if the frame exists.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

bool existJointName ( const std::string & name ) const

Check if a joint given by its name exists.

Parameters

[in] name Name of the joint.

Returns: True if the joint exists in the kinematic tree.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

JointIndex getBodyId ( const std::string & name ) const

Return the index of a body given by its name.

Warning: If no body is found, return the number of elements at time T. This can lead to errors if the model is expanded after this method is called (for example to get the id of a parent body)

Parameters

[in] name Name of the body.

Returns: Index of the body.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

FrameIndex getFrameId	(	const std::string &	name,
		const FrameType &	type = `(FrameType)(JOINT\|FIXED_JOINT\|BODY\|OP_FRAME\|SENSOR)`
	)		const

Returns the index of a frame given by its name.

See also: Model::existFrame to check if the frame exists or not.

Warning: If no frame is found, returns the size of the vector of Model::frames. This can lead to errors if the model is expanded after this method is called (for example to get the id of a parent frame).

Parameters

[in]	name	Name of the frame.
[in]	type	Type of the frame.

Returns: Index of the frame.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

JointIndex getJointId ( const std::string & name ) const

Return the index of a joint given by its name.

Warning: If no joint is found, return the number of elements at time T. This can lead to errors if the model is expanded after this method is called (for example to get the id of a parent joint)

Parameters

[in] name Name of the joint.

Returns: Index of the joint.

Referenced by ModelTpl< ADScalar, Options >::operator!=().

bool operator!= ( const ModelTpl< _Scalar, _Options, JointCollectionTpl > & other ) const

inline

Returns: true if *this is NOT equal to other.

Definition at line 328 of file multibody/model.hpp.

bool operator== ( const ModelTpl< _Scalar, _Options, JointCollectionTpl > & other ) const

inline

Equality comparison operator.

Returns: true if *this is equal to other.

Definition at line 251 of file multibody/model.hpp.

The documentation for this struct was generated from the following files:

Public Types

Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Detailed Description

template<typename _Scalar, int _Options, template< typename, int > class JointCollectionTpl> struct pinocchio::ModelTpl< _Scalar, _Options, JointCollectionTpl >

Member Function Documentation

template<typename _Scalar, int _Options, template< typename, int > class JointCollectionTpl>
struct pinocchio::ModelTpl< _Scalar, _Options, JointCollectionTpl >